SERVE

Solution

Custom cranes for steel, energy, aerospace, automotive, and more. Proven in 50+ countries.

Solution

20+ industries. 50+ countries. One trusted partner for customized material handling solutions.

CXTD New-Type Single-Girder Overhead crane

• The main girder is a box girder, connected to the end girders with high-strength bolts for ease of transportation;
• The trolley and hoist traveling mechanisms adopt a three-in-one drive configuration, featuring hardened‑gear reducers that deliver a compact structure and low noise levels.
• Featuring a new compact hoist and high-strength materials, the unit boasts a small footprint and light weight, enabling significant reductions in plant construction costs compared to conventional cranes.
• Modular design, short design cycle, high degree of standardization, and improved component utilization and interchangeability;
• Fully variable-frequency control ensures smooth operation with no shocks; slow speed under heavy load and fast speed under light load, delivering energy savings and reduced consumption.
Read More→

LDA-type single-girder Overhead crane

This product is widely used for lifting and transporting goods in various settings, such as factories, warehouses, and material yards. It must not be used in environments containing flammable, explosive, or corrosive substances.
This product offers two operating modes: ground‑based and cab‑mounted. The cab is available in open‑type or enclosed‑type configurations and can be mounted on either the left or right side, depending on site conditions. Access can be from the side or the end, allowing users to select the configuration that best meets their specific requirements.
Read More→

CXTS new-type dual-rail electric hoist trolley–type double-girder Overhead crane

• The main girder adopts an eccentric‑rail box‑type structure and is connected to the end girders with high‑strength bolts, facilitating transportation.
• The trolley and hoist traveling mechanisms adopt a three-in-one drive configuration, featuring hardened‑gear reducers that deliver a compact design and low noise levels.
• Featuring a new compact trolley and high-strength materials, the machine boasts a small footprint and light weight, enabling significant reductions in plant construction costs compared to conventional cranes.
• Modular design, short design cycle, high degree of standardization, and improved component utilization and interchangeability;
• Fully variable-frequency control ensures smooth operation with no shocks; slow speed under heavy load and fast speed under light load, delivering energy savings and reduced consumption.
• The trolley and hoist employ variable-frequency speed control, ensuring smooth operation and featuring an optimized anti-sway design; the machine’s duty cycle can reach A6.
• The trolley’s standard operating speed is 2–20 m/min (variable-frequency control); the gantry’s standard operating speed is 3–30 m/min (variable-frequency control).
Read More→

CXSM New-Type Winch-Driven Double-Girder Overhead crane

• Effective working space increased by 30%;
• Overall device power consumption reduced by 15% to 35%;
• Wheel pressure reduced by 15–56%
• Reduce investment costs for plant construction and supporting systems;
• Enhanced overall machine safety, with a 65% reduction in annual failure rate.
Read More→

QD-type double-girder Overhead crane with hoist

The QD-type hook‑type Overhead crane consists primarily of a bridge girder, a trolley‑traveling mechanism, a hoisting trolley, and electrical equipment. Depending on the frequency of use, it is classified into two service classes: A5 and A6.
All crane operations are performed from the operator’s cab.
Read More→

QB-type explosion-proof double-girder Overhead crane

All motors and electrical components of the QB‑type explosion‑proof Overhead crane meet the explosion‑proof requirements specified in GB 3836.2‑2000, “Electrical Equipment for Explosive Gas Atmospheres – Part 2: Flameproof Enclosure ‘d’,” while the overall machine performance complies with the provisions of JB/T 5897‑2006, “Explosion‑Proof Overhead crane.” The equipment has been inspected and approved by a nationally designated explosion‑proof product inspection authority and has obtained an Explosion‑Proof Certificate. The explosion‑proof markings are Ex d IIB T4 and Ex d IIC T4.
This product is suitable for locations within factories where the explosion‑proof rating does not exceed Class II B or II C, and the ignition temperature class is not lower than T4, in environments containing explosive gas mixtures of flammable gases or vapors with air. The applicable hazardous areas are Zone 1 or Zone 2 (see GB 3836.1‑2000).
This product is typically operated from the ground; however, it can also be controlled from the operator’s cab upon request. Its duty class is medium.
Read More→

QC-type electromagnetic double-girder Overhead crane

5–16 tons, 16/3.2–32/5 tons, 20/5–32/5 tons.
Read More→

QE-type double‑trolley, double‑girder Overhead crane

5+5 to 50+50 tons, 100+100/20–150+150/25 tons, 160+160/10 tons, 200+200/80 tons.
Read More→

QDY-type overhead bridge casting crane

• The crane is supplied with three-phase AC power, with a rated frequency of 50 Hz and a rated voltage of 380 V.
• The operating ambient temperature ranges from -10°C to +60°C.
• At a temperature of +40°C, the relative humidity shall not exceed 50%;
• If the above requirements are exceeded, execution shall be in accordance with the terms of the purchase contract as requested by the user.
Read More→
< 123 > proceed page

Request a Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT